Dimatteo Bank Sinker Mold with 5 Cavities and 1,2.3

Manufacture: adygil Item Category: Fishing Weight Item Trademark: ADYGIL Manufacture: adygil

Fishing Egg Sinker Mold Kits 1oz 2oz 3oz 4oz 5oz 5 Cavities

Item Category: Fishing Weight Manufacturer: Adygil Fishing Tackle Item Trademark: ADYGIL Manufacturer: Adygil Fishing Tackle

Bank Sinker Mold with 3 Cavities and 4.5.6-Ounce,Without Handle

Item Category: Fishing Weight Manufacturer: Adygil Fishing Tackle Item Trademark: ADYGIL Manufacturer: Adygil Fishing Tackle

Bank Sinker Mold with 3 Cavities and 4.5.6-Ounce,Without Handle

How to make sinkers: 1. Ensure you are wearing protective clothing and all care must be taken when heating and pouring lead. 2. Put scrap lead into

Pyramid Sinker Mold with 5 Cavities and 30g 40g 50g 60g 80g for Freshwater and Fishing Salfwater, 30 pcs 18mm S/S Eyelets Includes

How to make sinkers: 1. Ensure you are wearing protective clothing and all care must be taken when heating and pouring lead. 2. Put scrap lead into saucepan and heat until molten (lead will normally melt at 650 degrees). 3. Once lead is molten use a cooking spoon to take away any impurities that have risen to the top. 4.

Dimatteo Round Sinker Mold with 7 Cavities and 1/4,1/2,1,2,3,4,6-Ounce,Without Handle

Do it Mold 1107 BK-4-3Z Casts size of weight on sinker Casts 4 - 3oz Bank Sinkers Made in the USA 4 mold cavities

Do it Mold Bank Sinker Casts 4-3oz Sinkers - Do it Mold 1107 BK-4-3Z

DO-IT BK-6-1 Bank Mold : General Sporting Equipment

Adygil Snapper Sinker Mold with 1 Cavities and 8

Fishing Sinker Mould

Dimatteo Fishing No Roll Sinker Mold Kits 1oz 1.5oz 2oz 3oz 4 Cavities

Bank Sinker Production Sz: 1/2 Casts size of weight on sinker Made in the USA 8 mold cavities

Do It Mold Bank Sinker 1/2 Oz. Do it Mold 1192 BK-8-12 Casts 8-1/2 oz Bank Sinkers

Adygil Fishing Egg Sinker Mold Kits 1oz 2oz 3oz 4oz

Round Sinker Mold With 5 Cavities and 3.5-Ounce How to make sinkers: 1. Ensure you are wearing protective clothing and all care must be taken when heating and pouring lead. 2. Put scrap lead into saucepan and heat until molten (lead will normally melt at 650 degrees). 3. Once lead is molten use a cooking spoon to take away any impurities that have risen to the top. 4. Take your coat hanger wire (wire is only used when making sinkers that require a hole in the centre) and place within the mould.

Adygil Round Sinker Mold with 5 Cavities and 3.5-Ounce,without Handle

best_nj Fishing Weights Sinker Mold Herring CNC India

best_nj Fishing Weights Sinker Mold Herring CNC Cambodia

Bank Sinker Mould With 3 Cavities and 4.5.6-Ounce How to make sinkers: 1. Ensure you are wearing protective clothing and all care must be taken when heating and pouring lead. 2. Put scrap lead into saucepan and heat until molten (lead will normally melt at 650 degrees). Once lead is molten use a cooking spoon to take away any impurities that have risen to the top. 4.

Dimatteo Bank Sinker Mold with 3 Cavities and 4.5.6-Ounce,Without Handle